BMC/Intel-BMC/linux.git/arch/arm/mach-davinci, branch dev

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-06-26T18:08:27+00:00

Pull ARM SoC cleanups from Kevin Hilman: "A relatively small setup of cleanups this time around, and similar to last time the bulk of it is removal of legacy board support: - OMAP: removal of legacy (non-DT) booting for several platforms - i.MX: remove some legacy board files" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits) ARM: fix EFM32 build breakage caused by cpu_resume_arm ARM: 8389/1: Add cpu_resume_arm() for firmwares that resume in ARM state ARM: v7 setup function should invalidate L1 cache mach-omap2: Remove use of deprecated marco, PTR_RET in devices.c ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c ARM: OMAP2+: Constify irq_domain_ops ARM: OMAP2+: use symbolic defines for console loglevels instead of numbers ARM: at91: remove useless Makefile.boot ARM: at91: remove at91rm9200_sdramc.h ARM: at91: remove mach/at91_ramc.h and mach/at91rm9200_mc.h ARM: at91/pm: use the atmel-mc syscon defines pcmcia: at91_cf: Use syscon to configure the MC/smc ARM: at91: declare the at91rm9200 memory controller as a syscon mfd: syscon: Add Atmel MC (Memory Controller) registers definition ARM: at91: drop sam9_smc.c ata: at91: use syscon to configure the smc ARM: ux500: delete static resource defines ARM: ux500: rename ux500_map_io ARM: ux500: look up PRCMU resource from DT ARM: ux500: kill off L2CC static map ...

Merge branch 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

2015-06-23T22:50:46+00:00

Pull clkdev updates from Russell King: "This series addresses some breakage in clkdev caused by a previous patch set from the clk tree which introduced per-user clk structures. This basically renamed the existing 'struct clk' to 'struct clk_hw', and introduced a new 'struct clk'. This change will break anyone using clk_add_alias() with the common clk code enabled. Thankfully, the intersection of users of clk_add_alias() and those using the common clk code is practically zero, but this is something which should be fixed to keep the code sane. The problem is that clk_add_alias() does this: r = clk_get(...); l = clkdev_alloc(r, ...); clk_put(...); which causes the alias to store a pointer to 'r', which has been freed. The original patch set tried to work around this problem incorrectly - at clk_get() time, it tried to convert the struct clk to a struct clk_hw, and then creating a new struct clk from that. Clearly, if the original struct clk has been freed, then we have a use-after-free bug. We have other places in the tree which do something similar, so this series also addresses those locations too. This series addresses this problem by converting clkdev to store and use the clk_hw pointer. This allows clk_get() to only have to create it's per-user struct clk from the clk_hw. We can also get to the desired clk_hw at clk_add_alias() or clk lookup creation time, when the struct clk is "alive". We also perform some cleanups of the code: - replacing looped calls to clkdev_add() with clkdev_add_table() - replacing open-coded lookup allocation (which should have been using clkdev_alloc()) and subsequent clkdev_add() with clkdev_create() - replacing open-coded clk_add_alias() with clk_add_alias()" * 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: clk: s2mps11: use clkdev_create() ASoC: migor: use clkdev_create() ARM: omap2: use clkdev_add_alias() ARM: omap2: use clkdev_create() ARM: orion: use clkdev_create() ARM: lpc32xx: convert to use clkdev_add_table() SH: use clkdev_add_table() clkdev: add clkdev_create() helper clkdev: const-ify connection id to clk_add_alias() clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.h clkdev: drop __init from clkdev_add_table() clk: update clk API documentation to clarify clk_round_rate() clkdev: use clk_hw internally

ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency

2015-05-14T15:22:05+00:00

The SI unit of frequency is Hertz, named after Heinrich Hertz, and is given the symbol "Hz" to denote this. "hz" is not the unit of frequency, and is in fact meaningless. Fix arch/arm to correctly use "Hz", thereby acknowledging Heinrich Hertz' contribution to the modern world. Acked-by: Tony Lindgren Acked-by: Robert Jarzmik Reviewed-by: Andreas Färber Signed-off-by: Russell King

arm: davinci: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPS

2015-05-12T21:55:38+00:00

USE_PM_CLK_RUNTIME_OPS is introduced so we don't repeat the same code to do runtime_suspend and runtime_resume across users of PM clocks. Use it to remove the boilerplate code. Signed-off-by: Rajendra Nayak Reviewed-by: Kevin Hilman Acked-by: Santosh Shilimkar Acked-by: Geert Uytterhoeven Signed-off-by: Rafael J. Wysocki

clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.h

2015-05-06T10:58:51+00:00

clk_add_alias() is provided by clkdev, and is not part of the clk API. Howver, it is prototyped in two locations: linux/clkdev.h and linux/clk.h. This is a mess. Get rid of the redundant and unnecessary version in linux/clk.h. Acked-by: Tony Lindgren Tested-by: Robert Jarzmik Acked-by: Sekhar Nori Signed-off-by: Russell King

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-04-22T16:09:46+00:00

Pull ARM DT updates from Olof Johansson: "As always, this tends to be one of our bigger branches. There are lots of updates this release, but not that many jumps out as something that needs more detailed coverage. Some of the highlights are: - DTs for the new Annapurna Labs Alpine platform - more graphics DT pieces falling into place on Exynos, bridges, clocks. - plenty of DT updates for Qualcomm platforms for various IP blocks - some churn on Tegra due to switch-over to tool-generated pinctrl data - misc fixes and updates for Atmel at91 platforms - various DT updates to add IP block support on Broadcom's Cygnus platforms - more updates for Renesas platforms as DT support is added for various IP blocks (IPMMU, display, audio, etc)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits) ARM: dts: alpine: add internal pci Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135." ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB ARM: dts: qcom: Add idle state device nodes for 8064 ARM: dts: qcom: Add idle states device nodes for 8084 ARM: dts: qcom: Add idle states device nodes for 8974/8074 ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs devicetree: bindings: Document qcom,idle-states devicetree: bindings: Update qcom,saw2 node bindings dt-bindings: Add #defines for MSM8916 clocks and resets arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974 arm: dts: qcom: Add LCC nodes arm: dts: qcom: Add TCSR support for MSM8960 arm: dts: qcom: Add TCSR support for MSM8660 arm: dts: qcom: Add TCSR support for IPQ8064 ...

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-04-22T16:04:39+00:00

Pull ARM SoC cleanups from Olof Johansson: "We've got a fairly large cleanup branch this time. The bulk of this is removal of non-DT platforms of several flavors: - Atmel at91 platforms go full-DT, with removal of remaining board-file based support - OMAP removes legacy board files for three more platforms - removal of non-DT mach-msm, newer Qualcomm platforms now live in mach-qcom - Freescale i.MX25 also removes non-DT platform support" Most of the rest of the changes here are fallout from the above, i.e. for example removal of drivers that now lack platforms, etc. * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits) mmc: Remove msm_sdcc driver gpio: Remove gpio-msm-v1 driver ARM: Remove mach-msm and associated ARM architecture code ARM: shmobile: cpuidle: Remove the pointless default driver ARM: davinci: dm646x: Add interrupt resource for McASPs ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x ARM: davinci: dm646x: Clean up the McASP DMA resources ARM: davinci: devices-da8xx: Add support for McASP2 on da830 ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request ARM: OMAP2+: Remove legacy support for omap3 TouchBook ARM: OMAP3: Remove legacy support for devkit8000 ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board ARM: shmobile: Consolidate the pm code for R-Car Gen2 ARM: shmobile: r8a7791: Correct SYSCIER value ARM: shmobile: r8a7790: Correct SYSCIER value ARM: at91: remove old setup ARM: at91: sama5d4: remove useless map_io ARM: at91: sama5 use SoC detection infrastructure ...

wlcore: remove wl12xx_platform_data

2015-03-24T16:48:14+00:00

Now that we have wlcore device-tree bindings in place (for both wl12xx and wl18xx), remove the legacy wl12xx_platform_data struct, and move its members into the platform device data (that is passed to wlcore) Davinci 850 is the only platform that still set the platform data in the legacy way (and doesn't have DT bindings), so remove the relevant code/Kconfig option from the board file (as suggested by Sekhar Nori) Since no one currently uses wlcore_spi, simply remove its platform data support (DT bindings will have to be added if someone actually needs it) Signed-off-by: Luciano Coelho Signed-off-by: Eliad Peller Tested-by: Nikita Kiryanov Acked-by: Kalle Valo Acked-by: Sekhar Nori Signed-off-by: Tony Lindgren

wl12xx: use frequency instead of enumerations for pdata clocks

2015-03-24T16:47:57+00:00

Instead of defining an enumeration with the FW specific values for the different clock rates, use the actual frequency instead. Also add a boolean to specify whether the clock is XTAL or not. Change all board files to reflect this. Signed-off-by: Luciano Coelho [Eliad - small fixes, update board file changes] Signed-off-by: Eliad Peller Tested-by: Nikita Kiryanov Acked-by: Kalle Valo Acked-by: Sekhar Nori Signed-off-by: Tony Lindgren

ARM: cpuidle: Remove duplicate header inclusion

2015-03-23T17:03:11+00:00

The cpu_do_idle() function is always used by the cpuidle drivers. That led to have each driver including cpuidle.h and proc-fns.h, they are always paired. That makes a lot of duplicate headers inclusion. Instead of including both in each .c file, move the proc-fns.h header inclusion in the cpuidle.h header file directly, so we can save some line of code. Signed-off-by: Daniel Lezcano Acked-by: Kevin Hilman Acked-by: Lorenzo Pieralisi Tested-by: Lorenzo Pieralisi