BMC/Intel-BMC/linux.git/arch/arm/kvm, branch dev-4.17

arm/arm64: KVM: Add PSCI version selection API

2018-04-20T15:32:23+00:00

Although we've implemented PSCI 0.1, 0.2 and 1.0, we expose either 0.1 or 1.0 to a guest, defaulting to the latest version of the PSCI implementation that is compatible with the requested version. This is no different from doing a firmware upgrade on KVM. But in order to give a chance to hypothetical badly implemented guests that would have a fit by discovering something other than PSCI 0.2, let's provide a new API that allows userspace to pick one particular version of the API. This is implemented as a new class of "firmware" registers, where we expose the PSCI version. This allows the PSCI version to be save/restored as part of a guest migration, and also set to any supported version if the guest requires it. Cc: stable@vger.kernel.org #4.16 Reviewed-by: Christoffer Dall Signed-off-by: Marc Zyngier

Merge tag 'kvm-arm-fixes-for-v4.16-2' into HEAD

2018-03-19T17:43:01+00:00

Resolve conflicts with current mainline

KVM: arm/arm64: Avoid VGICv3 save/restore on VHE with no IRQs

2018-03-19T10:53:21+00:00

We can finally get completely rid of any calls to the VGICv3 save/restore functions when the AP lists are empty on VHE systems. This requires carefully factoring out trap configuration from saving and restoring state, and carefully choosing what to do on the VHE and non-VHE path. One of the challenges is that we cannot save/restore the VMCR lazily because we can only write the VMCR when ICC_SRE_EL1.SRE is cleared when emulating a GICv2-on-GICv3, since otherwise all Group-0 interrupts end up being delivered as FIQ. To solve this problem, and still provide fast performance in the fast path of exiting a VM when no interrupts are pending (which also optimized the latency for actually delivering virtual interrupts coming from physical interrupts), we orchestrate a dance of only doing the activate/deactivate traps in vgic load/put for VHE systems (which can have ICC_SRE_EL1.SRE cleared when running in the host), and doing the configuration on every round-trip on non-VHE systems. Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier

KVM: arm/arm64: Move arm64-only vgic-v2-sr.c file to arm64

2018-03-19T10:53:20+00:00

The vgic-v2-sr.c file now only contains the logic to replay unaligned accesses to the virtual CPU interface on 16K and 64K page systems, which is only relevant on 64-bit platforms. Therefore move this file to the arm64 KVM tree, remove the compile directive from the 32-bit side makefile, and remove the ifdef in the C file. Since this file also no longer saves/restores anything, rename the file to vgic-v2-cpuif-proxy.c to more accurately describe the logic in this file. Reviewed-by: Andre Przywara Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier

KVM: arm/arm64: Handle VGICv2 save/restore from the main VGIC code

2018-03-19T10:53:20+00:00

We can program the GICv2 hypervisor control interface logic directly from the core vgic code and can instead do the save/restore directly from the flush/sync functions, which can lead to a number of future optimizations. Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier

KVM: arm/arm64: Prepare to handle deferred save/restore of SPSR_EL1

2018-03-19T10:53:17+00:00

SPSR_EL1 is not used by a VHE host kernel and can be deferred, but we need to rework the accesses to this register to access the latest value depending on whether or not guest system registers are loaded on the CPU or only reside in memory. The handling of accessing the various banked SPSRs for 32-bit VMs is a bit clunky, but this will be improved in following patches which will first prepare and subsequently implement deferred save/restore of the 32-bit registers, including the 32-bit SPSRs. Reviewed-by: Marc Zyngier Reviewed-by: Andrew Jones Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier

KVM: arm64: Introduce VHE-specific kvm_vcpu_run

2018-03-19T10:53:13+00:00

So far this is mostly (see below) a copy of the legacy non-VHE switch function, but we will start reworking these functions in separate directions to work on VHE and non-VHE in the most optimal way in later patches. The only difference after this patch between the VHE and non-VHE run functions is that we omit the branch-predictor variant-2 hardening for QC Falkor CPUs, because this workaround is specific to a series of non-VHE ARMv8.0 CPUs. Reviewed-by: Marc Zyngier Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier

KVM: arm/arm64: Get rid of vcpu->arch.irq_lines

2018-03-19T10:53:10+00:00

We currently have a separate read-modify-write of the HCR_EL2 on entry to the guest for the sole purpose of setting the VF and VI bits, if set. Since this is most rarely the case (only when using userspace IRQ chip and interrupts are in flight), let's get rid of this operation and instead modify the bits in the vcpu->arch.hcr[_el2] directly when needed. Acked-by: Marc Zyngier Reviewed-by: Andrew Jones Reviewed-by: Julien Thierry Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier

KVM: arm: Enable emulation of the physical timer

2018-02-26T09:48:02+00:00

Set the handlers to emulate read and write operations for CNTP_CTL, CNTP_CVAL and CNTP_TVAL registers in such a way that VMs can use the physical timer. Signed-off-by: Jérémy Fanguède Signed-off-by: Christoffer Dall

ARM: kvm: fix building with gcc-8

2018-02-15T19:58:36+00:00

In banked-sr.c, we use a top-level '__asm__(".arch_extension virt")' statement to allow compilation of a multi-CPU kernel for ARMv6 and older ARMv7-A that don't normally support access to the banked registers. This is considered to be a programming error by the gcc developers and will no longer work in gcc-8, where we now get a build error: /tmp/cc4Qy7GR.s:34: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_usr' /tmp/cc4Qy7GR.s:41: Error: Banked registers are not available with this architecture. -- `mrs r3,ELR_hyp' /tmp/cc4Qy7GR.s:55: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_svc' /tmp/cc4Qy7GR.s:62: Error: Banked registers are not available with this architecture. -- `mrs r3,LR_svc' /tmp/cc4Qy7GR.s:69: Error: Banked registers are not available with this architecture. -- `mrs r3,SPSR_svc' /tmp/cc4Qy7GR.s:76: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_abt' Passign the '-march-armv7ve' flag to gcc works, and is ok here, because we know the functions won't ever be called on pre-ARMv7VE machines. Unfortunately, older compiler versions (4.8 and earlier) do not understand that flag, so we still need to keep the asm around. Backporting to stable kernels (4.6+) is needed to allow those to be built with future compilers as well. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84129 Fixes: 33280b4cd1dc ("ARM: KVM: Add banked registers save/restore") Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann Signed-off-by: Christoffer Dall