BMC/Intel-BMC/linux.git/arch/arm/kvm/interrupts.S, branch dev

Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

2015-06-26T19:20:00+00:00

Pull ARM updates from Russell King: "Bigger items included in this update are: - A series of updates from Arnd for ARM randconfig build failures - Updates from Dmitry for StrongARM SA-1100 to move IRQ handling to drivers/irqchip/ - Move ARMs SP804 timer to drivers/clocksource/ - Perf updates from Mark Rutland in preparation to move the ARM perf code into drivers/ so it can be shared with ARM64. - MCPM updates from Nicolas - Add support for taking platform serial number from DT - Re-implement Keystone2 physical address space switch to conform to architecture requirements - Clean up ARMv7 LPAE code, which goes in hand with the Keystone2 changes. - L2C cleanups to avoid unlocking caches if we're prevented by the secure support to unlock. - Avoid cleaning a potentially dirty cache containing stale data on CPU initialisation - Add ARM-only entry point for secondary startup (for machines that can only call into a Thumb kernel in ARM mode). Same thing is also done for the resume entry point. - Provide arch_irqs_disabled via asm-generic - Enlarge ARMv7M vector table - Always use BFD linker for VDSO, as gold doesn't accept some of the options we need. - Fix an incorrect BSYM (for Thumb symbols) usage, and convert all BSYM compiler macros to a "badr" (for branch address). - Shut up compiler warnings provoked by our cmpxchg() implementation. - Ensure bad xchg sizes fail to link" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (75 commits) ARM: Fix build if CLKDEV_LOOKUP is not configured ARM: fix new BSYM() usage introduced via for-arm-soc branch ARM: 8383/1: nommu: avoid deprecated source register on mov ARM: 8391/1: l2c: add options to overwrite prefetching behavior ARM: 8390/1: irqflags: Get arch_irqs_disabled from asm-generic ARM: 8387/1: arm/mm/dma-mapping.c: Add arm_coherent_dma_mmap ARM: 8388/1: tcm: Don't crash when TCM banks are protected by TrustZone ARM: 8384/1: VDSO: force use of BFD linker ARM: 8385/1: VDSO: group link options ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations ARM: remove __bad_xchg definition ARM: 8369/1: ARMv7M: define size of vector table for Vybrid ARM: 8382/1: clocksource: make ARM_TIMER_SP804 depend on GENERIC_SCHED_CLOCK ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusion ARM: 8364/1: fix BE32 module loading ARM: 8360/1: add secondary_startup_arm prototype in header file ARM: 8359/1: correct secondary_startup_arm mode ARM: proc-v7: sanitise and document registers around errata ARM: proc-v7: clean up MIDR access ...

arm: KVM: force execution of HCPTR access on VM exit

2015-06-17T08:40:14+00:00

On VM entry, we disable access to the VFP registers in order to perform a lazy save/restore of these registers. On VM exit, we restore access, test if we did enable them before, and save/restore the guest/host registers if necessary. In this sequence, the FPEXC register is always accessed, irrespective of the trapping configuration. If the guest didn't touch the VFP registers, then the HCPTR access has now enabled such access, but we're missing a barrier to ensure architectural execution of the new HCPTR configuration. If the HCPTR access has been delayed/reordered, the subsequent access to FPEXC will cause a trap, which we aren't prepared to handle at all. The same condition exists when trapping to enable VFP for the guest. The fix is to introduce a barrier after enabling VFP access. In the vmexit case, it can be relaxed to only takes place if the guest hasn't accessed its view of the VFP registers, making the access to FPEXC safe. The set_hcptr macro is modified to deal with both vmenter/vmexit and vmtrap operations, and now takes an optional label that is branched to when the guest hasn't touched the VFP registers. Reported-by: Vikram Sethi Cc: stable@kernel.org # v3.9+ Signed-off-by: Marc Zyngier

ARM: kvm: fix a bad BSYM() usage

2015-05-08T16:33:47+00:00

BSYM() should only be used when refering to local symbols in the same assembly file which are resolved by the assembler, and not for linker-fixed up symbols. The use of BSYM() with panic is incorrect as the linker is involved in fixing up this relocation, and it knows whether panic() is ARM or Thumb. Acked-by: Nicolas Pitre Acked-by: Dave Martin Signed-off-by: Russell King

KVM: arm: Add ARMv7 API to flush TLBs

2015-01-16T13:40:14+00:00

This patch adds ARMv7 architecture TLB Flush function. Acked-by: Marc Zyngier Acked-by: Christoffer Dall Signed-off-by: Mario Smarduch

ARM: KVM: __kvm_vcpu_run function return result fix in BE case

2014-07-11T11:57:39+00:00

The __kvm_vcpu_run function returns a 64-bit result in two registers, which has to be adjusted for BE case. Signed-off-by: Victor Kamensky Acked-by: Christoffer Dall Acked-by: Marc Zyngier Signed-off-by: Marc Zyngier

ARM: KVM: handle 64bit values passed to mrcc or from mcrr instructions in BE case

2014-07-11T11:57:38+00:00

In some cases the mcrr and mrrc instructions in combination with the ldrd and strd instructions need to deal with 64bit value in memory. The ldrd and strd instructions already handle endianness within word (register) boundaries but to get effect of the whole 64bit value represented correctly, rr_lo_hi macro is introduced and is used to swap registers positions when the mcrr and mrrc instructions are used. That has the effect of swapping two words. Signed-off-by: Victor Kamensky Reviewed-by: Christoffer Dall Acked-by: Marc Zyngier Signed-off-by: Marc Zyngier

arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT

2014-02-27T18:27:10+00:00

Commit 1fcf7ce0c602 (arm: kvm: implement CPU PM notifier) added support for CPU power-management, using a cpu_notifier to re-init KVM on a CPU that entered CPU idle. The code assumed that a CPU entering idle would actually be powered off, loosing its state entierely, and would then need to be reinitialized. It turns out that this is not always the case, and some HW performs CPU PM without actually killing the core. In this case, we try to reinitialize KVM while it is still live. It ends up badly, as reported by Andre Przywara (using a Calxeda Midway): [ 3.663897] Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x685760 [ 3.663897] unexpected data abort in Hyp mode at: 0xc067d150 [ 3.663897] unexpected HVC/SVC trap in Hyp mode at: 0xc0901dd0 The trick here is to detect if we've been through a full re-init or not by looking at HVBAR (VBAR_EL2 on arm64). This involves implementing the backend for __hyp_get_vectors in the main KVM HYP code (rather small), and checking the return value against the default one when the CPU notifier is called on CPU_PM_EXIT. Reported-by: Andre Przywara Tested-by: Andre Przywara Cc: Lorenzo Pieralisi Cc: Rob Herring Acked-by: Christoffer Dall Signed-off-by: Marc Zyngier Signed-off-by: Paolo Bonzini

Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm

2013-09-06T01:07:32+00:00

Pull ARM updates from Russell King: "This set includes adding support for Neon acceleration of RAID6 XOR code from Ard Biesheuvel, cache flushing and barrier updates from Will Deacon, and a cleanup to the ARM debug code which reduces the amount of code by about 500 lines. A few other cleanups, such as constifying the machine descriptors which already shouldn't be written to, cleaning up the printing of the L2 cache size" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (55 commits) ARM: 7826/1: debug: support debug ll on hisilicon soc ARM: 7830/1: delay: don't bother reporting bogomips in /proc/cpuinfo ARM: 7829/1: Add ".text.unlikely" and ".text.hot" to arm unwind tables ARM: 7828/1: ARMv7-M: implement restart routine common to all v7-M machines ARM: 7827/1: highbank: fix debug uart virtual address for LPAE ARM: 7823/1: errata: workaround Cortex-A15 erratum 773022 ARM: 7806/1: allow DEBUG_UNCOMPRESS for Tegra ARM: 7793/1: debug: use generic option for ep93xx PL10x debug port ARM: debug: move SPEAr debug to generic PL01x code ARM: debug: move davinci debug to generic 8250 code ARM: debug: move keystone debug to generic 8250 code ARM: debug: remove DEBUG_ROCKCHIP_UART ARM: debug: provide generic option choices for 8250 and PL01x ports ARM: debug: move PL01X debug include into arch/arm/include/debug/ ARM: debug: provide PL01x debug uart phys/virt address configuration options ARM: debug: add support for word accesses to debug/8250.S ARM: debug: move 8250 debug include into arch/arm/include/debug/ ARM: debug: provide 8250 debug uart phys/virt address configuration options ARM: debug: provide 8250 debug uart register shift configuration option ARM: debug: provide 8250 debug uart flow control configuration option ...

ARM: KVM: Add newlines to panic strings

2013-08-30T22:48:02+00:00

The panic strings are hard to read and on narrow terminals some characters are simply truncated off the panic message. Make is slightly prettier with a newline in the Hyp panic strings. Acked-by: Marc Zyngier Signed-off-by: Christoffer Dall

ARM: kvm: use inner-shareable barriers after TLB flushing

2013-08-12T11:25:45+00:00

When flushing the TLB at PL2 in response to remapping at stage-2 or VMID rollover, we have a dsb instruction to ensure completion of the command before continuing. Since we only care about other processors for TLB invalidation, use the inner-shareable variant of the dsb instruction instead. Acked-by: Marc Zyngier Reviewed-by: Catalin Marinas Signed-off-by: Will Deacon