BMC/Intel-BMC/linux.git/arch/arm/boot/dts/sun4i-a10-pcduino.dts, branch dev

ARM: dts: sun4i: Add A10 SRAM and SRAM controller

2015-06-01T09:13:26+00:00

The A10 has a few SRAM that can be mapped either to a device or to the CPU, with the mapping being controlled by a SRAM controller. Add the SRAM controller, the SRAM that it drives and the section that can be used by the various devices. Signed-off-by: Maxime Ripard Acked-by: Arnd Bergmann Acked-by: Hans de Goede Tested-by: Hans de Goede

ARM: sunxi: dt: Remove the FSF address

2015-05-10T08:22:23+00:00

The FSF address triggers a warning on checkpatch, saying that the FSF license is already present in the Linux source code, and that it has already changed in the past. Remove it from our DT, as suggested. Signed-off-by: Maxime Ripard

ARM: sunxi: DT: Add stdout-path property

2015-04-27T06:20:30+00:00

Add UART aliases and stdout-path property for all the Allwinner boards so that we won't have to rely on the bootargs' console= value, while working with legacy bootloaders. While we're at it, also remove the mentions of earlyprintk in the bootargs, that will remove our default bootargs entirely, and allow the kernel to boot on a system even if DEBUG_LL is configured for another system. Signed-off-by: Maxime Ripard

ARM: sun4i: pcduino: Convert to DT label based syntax

2015-04-27T06:20:20+00:00

In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard

ARM: dts: pcduino: Enable user LED and button support for pcDuino

2015-01-21T08:59:08+00:00

The pcDuino board has LEDs connected to PH15/PH16, and back/home/menu buttons to PH17/18/19 respectively. Enable these via gpio-leds and gpio-keys. This is shared across the v1 and v2 versions of the board. Tested on a v2 and verified against the schematics of a v1. Signed-off-by: Zoltan HERPAI Acked-by: Hans de Goede [Maxime: Added some newlines between the button nodes] Signed-off-by: Maxime Ripard

ARM: sunxi: DT: convert DTs to use common GPIOs includes

2015-01-21T08:58:56+00:00

Replace the various raw GPIO flags by their definition in the common dt-bindings header. Signed-off-by: Maxime Ripard

ARM: sunxi: DT: Convert to device tree includes

2015-01-21T08:58:55+00:00

Prepare the device trees to use the C preprocessor. Signed-off-by: Maxime Ripard

ARM: sun4i: pcduino: Relicense the device tree under GPLv2/X11

2014-11-05T08:07:48+00:00

The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede Acked-by: Zoltan HERPAI

ARM: dts: sun4i: Add AXP209 support to various boards

2014-07-01T07:48:54+00:00

At a node for the axp209, and where necessary the i2c controller to the dts for various boards. Note the axp209 regulators are omitted as we don't have any use for them yet, and on some boards were not sure how exactly they are wired up. Adding support for just the axp209 without the regulators is still useful, as it will give us power-button and poweroff support. Signed-off-by: Carlo Caione [hdegoede@redhat.com: Drop the regulator bits for now] Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard

ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes

2014-05-11T17:07:00+00:00

Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard