Intel OpenBMC Linux kernel source tree (mirror) https://git.radix-linux.su/BMC/Intel-BMC/linux.git/atom?h=dev 2015-09-14T11:45:25+00:00 2015-09-14T11:45:25+00:00 Benjamin Herrenschmidt benh@kernel.crashing.org 2015-04-14T05:43:46+00:00 urn:sha1:8f93ca5e44a978a2f6c8306922ad581944146948 2015-06-26T18:43:59+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-06-26T18:43:59+00:00 urn:sha1:3d9f96d850e4bbfae24dc9aee03033dd77c81596 Pull ARM SoC DT updates from Kevin Hilman: "As usual, quite a few device-tree updates in ARM land. There was one minor churn in DTs due to relicensing under a dual-license, and lots of little additions of new peripherals, features etc, but nothing really exciting to call to your attention. Some higlights, focsuing on support for new SoCs and boards: - AT91: new boards: Overkiz, Acme Systems' Arietta G25 - tegra: HDA support - bcm: new platforms: Buffalo WXR-1900DHP, SmartRG SR400ac, ASUS RT-AC87U - mvebu: new platforms: Compulab CM-A510, Armada 385-based Linksys boards, DLink DNS-327L - OMAP: new platforms: Baltos IR5221, LogicPD Torpedo, Toby-Churchill SL50 - ARM: added support for Juno r1 board - sunxi: A33 SoC support; new boards: A23 EVB, SinA33, GA10H-A33, Mele A1000G - imx: i.MX7D SoC support; new boards: Armadeus Systems APF6, Gateworks GW5510, and aristainetos2 boards - hisilicon: hi6220 SoC support; new boards: 96boards hikey" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (462 commits) ARM: hisi: revert changes from hisi/hip04-dt branch ARM: nomadik: set proper compatible for accelerometer ARM64: juno: add GPIO keys ARM: at91/dt: sama5d4: fix dma conf for aes, sha and tdes nodes ARM: dts: Introduce STM32F429 MCU ARM: socfpga: dts: enable ethernet for Arria10 devkit ARM: dts: k2l: fix the netcp range size ARM: dts: k2e: fix the netcp range size ARM: dts: k2hk: fix the netcp range size ARM: dts: k2l-evm: Add device bindings for netcp driver ARM: dts: k2e-evm: Add device bindings for netcp driver ARM: dts: k2hk-evm: Add device bindings for netcp driver ARM: BCM5301X: Add DT for Asus RT-AC87U ARM: BCM5301X: add IRQ numbers for PCIe controller ARM: BCM5301X: add NAND flash chip description arm64: dts: Add dts files for Hisilicon Hi6220 SoC clk: hi6220: Document devicetree bindings for hi6220 clock arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC ARM: at91/dt: sama5d4ek: mci0 uses slot 0 ARM: at91/dt: kizbox: fix mismatch LED PWM device ... 2015-06-26T18:34:35+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-06-26T18:34:35+00:00 urn:sha1:4aa705b18bf17c4ff33ff7bbcd3f0c596443fa81 Pull ARM SoC platform support updates from Kevin Hilman: "Our SoC branch usually contains expanded support for new SoCs and other core platform code. Some highlights from this round: - sunxi: SMP support for A23 SoC - socpga: big-endian support - pxa: conversion to common clock framework - bcm: SMP support for BCM63138 - imx: support new I.MX7D SoC - zte: basic support for ZX296702 SoC" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (134 commits) ARM: zx: Add basic defconfig support for ZX296702 ARM: dts: zx: add an initial zx296702 dts and doc clk: zx: add clock support to zx296702 dt-bindings: Add #defines for ZTE ZX296702 clocks ARM: socfpga: fix build error due to secondary_startup MAINTAINERS: ARM64: EXYNOS: Extend entry for ARM64 DTS ARM: ep93xx: simone: support for SPI-based MMC/SD cards MAINTAINERS: update Shawn's email to use kernel.org one ARM: socfpga: support suspend to ram ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10 ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5 ARM: EXYNOS: register power domain driver from core_initcall ARM: EXYNOS: use PS_HOLD based poweroff for all supported SoCs ARM: SAMSUNG: Constify platform_device_id ARM: EXYNOS: Constify irq_domain_ops ARM: EXYNOS: add coupled cpuidle support for Exynos3250 ARM: EXYNOS: add exynos_get_boot_addr() helper ARM: EXYNOS: add exynos_set_boot_addr() helper ARM: EXYNOS: make exynos_core_restart() less verbose ARM: EXYNOS: fix exynos_boot_secondary() return value on timeout ... 2015-06-11T23:30:19+00:00 Kevin Hilman khilman@linaro.org 2015-06-11T23:30:19+00:00 urn:sha1:1647e3c73ce54fc32536bb3a834eccad39b23572 Few more omap device tree changes for v4.2 merge window: - Add dm9000 Ethernet support to omap3-devkit8000 - Add Toby-Churchill SL50 board support - Add vendor prefix for Toby Churchill Ltd * tag 'omap-for-v4.2/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-sl50: Add Toby-Churchill SL50 board support. of: Add vendor prefix for Toby Churchill Ltd. ARM: dts: omap3-devkit8000: Add dm9000 support 2015-06-11T23:18:30+00:00 Jun Nie jun.nie@linaro.org 2015-06-04T03:21:02+00:00 urn:sha1:d5553cb05a041d7c31e4e70950ecbb4ee52049cb Add initial dts file and document for ZX296702 and board ZX296702-AD1. More peripherals will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> 2015-06-11T21:39:19+00:00 Kevin Hilman khilman@linaro.org 2015-06-11T21:39:19+00:00 urn:sha1:7d5a0ff5a808cc582542c00a6f669dbcd411ece5 Samsung another DT udpates for v4.2 - use labels for overriding nodes for all of exynos stuff (by Krzysztof Kozlowski) - add sysmmu nodes for exynos SoCs (by Marek Szyprowski) - for exynos5422-odroidxu3 : enalbe wake alarm of S2MPS11 RTC : Hook up PWM and use it for LEDs : add support for Odroid XU3 Lite - remove duplicated i2c7 for exynos5250-snow - add JPEG codec nodes for exynos5420 - add vendor prefix for Hardkernel * tag 'samsung-dt-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (33 commits) ARM: dts: add sysmmu nodes for exynos5420 ARM: dts: add sysmmu nodes for exynos5250 ARM: dts: add sysmmu nodes for exynos4415 ARM: dts: add sysmmu nodes for exynos3250 ARM: dts: add sysmmu nodes for exynos4 ARM: dts: Add Odroid XU3 Lite support of: Add vendor prefix for Hardkernel ARM: dts: odroidxu3: Enable wake alarm of S2MPS11 RTC ARM: dts: exynos5420: add nodes for jpeg codec ARM: dts: s3c2416: Use labels for overriding nodes in SMDK2416 ARM: dts: s3c2416: Add labels to S3C2416 nodes ARM: dts: Use labels for overriding nodes in exynos5422-odroidxu3 ARM: dts: Use labels for overriding nodes in exynos5440 boards ARM: dts: Use labels for overriding nodes in exynos5420-smdk5420 ARM: dts: Use labels for overriding nodes in exynos542x ARM: dts: Use labels for overriding nodes in exynos5420-arndale-octa ARM: dts: Remove duplicated I2C7 nodes in exynos5250-snow ARM: dts: Use labels for overriding nodes in exynos5250 ARM: dts: Add labels to exynos5 nodes ARM: dts: exynos5422-odroidxu3: Hook up PWM and use it for LEDs ... 2015-06-11T21:37:45+00:00 Kevin Hilman khilman@linaro.org 2015-06-11T21:37:45+00:00 urn:sha1:ecdf94da6f91310d08081e05db78a6c997b44e4b Linux 4.1-rc6 Conflicts: arch/arm/boot/dts/zynq-7000.dtsi Resolution summary: Mainline had an earlier version of the commit, resolve in favor of the newer patch in next/dt branch. 2015-06-11T00:03:07+00:00 Kevin Hilman khilman@linaro.org 2015-06-11T00:03:07+00:00 urn:sha1:36d32ed978a9161ec8a1043511dff756eea9a251 Fourth batch of DT changes for 4.2: - rtc node for at91sam9rl/at91sam9rlek - move to stdout-path for console on kizbox and all Atmel's boards - Addition of the Acme Systems' Arietta G25 - two little fixes for Kizbox and sama5d4ek * tag 'at91-dt4' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: sama5d4ek: mci0 uses slot 0 ARM: at91/dt: kizbox: fix mismatch LED PWM device ARM: at91/dt: Add Acme Arietta G25 ARM: at91/dt: sama5d4 xplained: use stdout-path ARM: at91/dt: sama5d4ek: use stdout-path ARM: at91/dt: sama5d3 xplained: use stdout-path ARM: at91/dt: sama5d3xek: use stdout-path ARM: at91/dt: at91sam9x5ek: use stdout-path ARM: at91/dt: at91sam9rlek: use stdout-path ARM: at91/dt: at91sam9n12ek: use stdout-path ARM: at91/dt: at91sam9m10g45ek use stdout-path ARM: at91/dt: at91sam9g20ek: use stdout-path ARM: at91/dt: at91sam9263ek: use stdout-path ARM: at91/dt: at91sam9261ek: use stdout-path ARM: at91/dt: at91rm9200ek: use stdout-path ARM: at91/dt: kizbox: use stdout-path ARM: at91/dt: at91sam9rlek: add RTC ARM: at91/dt: at91sam9rl: fix rtc node 2015-06-11T00:01:25+00:00 Kevin Hilman khilman@linaro.org 2015-06-11T00:01:25+00:00 urn:sha1:b3182ff6d97b69275e78e29b5377d8338e620fe1 The i.MX device tree changes for 4.2: - Add device tree for i.MX7D SoC and imx7d-sdb board - New i.MX6 board support: Armadeus Systems APF6, Gateworks GW5510, and aristainetos2 boards - Change LVDS to use simple-panel for nitrogen6x and sabrelite boards - Add Wifi/Bluetooth devices support for cubox-i board - Remove unused regulators and correct OTG roles setting for imx6sl-warp board - Add I2C support for imx23-olinuxino board - Move imx6qdl HDMI device to a better place - Add power-domain for imx6qdl CODA device * tag 'imx-dt-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (24 commits) ARM: dts: imx6dl: add imx6dl gpt specific compatible string ARM: dts: imx6: add DT for aristainetos2 board ARM: dts: cubox-i/hummingboard: Fix the license text ARM: dts: sabrelite: use simple-panel instead of display-timings for LVDS0 ARM: dts: nitrogen6x: use simple-panel instead of display-timings for LVDS0 ARM: dts: add imx7d-sdb support ARM: dts: add imx7d soc dtsi file ARM: dts: Armadeus Systems APF6 family support (i.MX6) ARM: dts: vf610: Nomenclature fixup for PTC12 pin used in RMII mode. ARM: dts: cubox-i: add support for Broadcom Wifi/Bluetooth devices Document: dt: binding: imx: update document for imx7d support ARM: dts: imx6qdl: Add power-domain phandle to CODA device node ARM: dts: Gateworks GW5510 support (i.MX6) ARM: dts: imx6sl-warp: Fix OTG roles ARM: dts: imx6sl-warp: Remove USB regulators ARM: dts: imx6sl-warp: Remove unused regulator ARM: dts: add pinfunc include file to support imx7d ARM: mxs: fix in tree users of ssd1306 ARM: dts: imx6qdl-hummingboard: Add PCIe support ARM: dts: imx23-olinuxino: Add i2c support ... 2015-06-10T23:07:41+00:00 Kevin Hilman khilman@linaro.org 2015-06-10T23:07:41+00:00 urn:sha1:62d4585fb1703cb4fc4f68e4beb8fe09e92cfecf This pull request contains Broadcom BCM5301x related changes: - Hauke adds the interrupt mapping for the BCM5301x PCIe controller - Haule adds support for NAND flash using the standard Broadcom NAND controller iProc specific binding on BCM4708/5301x - Rafal adds support for the Asus RT-AC87U router * tag 'arm-soc/for-4.2/dts-part3' of https://github.com/Broadcom/stblinux: ARM: BCM5301X: Add DT for Asus RT-AC87U ARM: BCM5301X: add IRQ numbers for PCIe controller ARM: BCM5301X: add NAND flash chip description