BMC/Intel-BMC/linux.git/arch/arc/kernel/kprobes.c, branch dev-5.0

bpf/error-inject/kprobes: Clear current_kprobe and enable preempt in kprobe

2018-06-21T10:33:19+00:00

Clear current_kprobe and enable preemption in kprobe even if pre_handler returns !0. This simplifies function override using kprobes. Jprobe used to require to keep the preemption disabled and keep current_kprobe until it returned to original function entry. For this reason kprobe_int3_handler() and similar arch dependent kprobe handers checks pre_handler result and exit without enabling preemption if the result is !0. After removing the jprobe, Kprobes does not need to keep preempt disabled even if user handler returns !0 anymore. But since the function override handler in error-inject and bpf is also returns !0 if it overrides a function, to balancing the preempt count, it enables preemption and reset current kprobe by itself. That is a bad design that is very buggy. This fixes such unbalanced preempt-count and current_kprobes setting in kprobes, bpf and error-inject. Note: for powerpc and x86, this removes all preempt_disable from kprobe_ftrace_handler because ftrace callbacks are called under preempt disabled. Signed-off-by: Masami Hiramatsu Acked-by: Thomas Gleixner Acked-by: Naveen N. Rao Cc: Alexei Starovoitov Cc: Ananth N Mavinakayanahalli Cc: Andrew Morton Cc: Benjamin Herrenschmidt Cc: Catalin Marinas Cc: David S. Miller Cc: Fenghua Yu Cc: Heiko Carstens Cc: James Hogan Cc: Josef Bacik Cc: Linus Torvalds Cc: Martin Schwidefsky Cc: Michael Ellerman Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Ralf Baechle Cc: Rich Felker Cc: Russell King Cc: Steven Rostedt Cc: Tony Luck Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Link: https://lore.kernel.org/lkml/152942494574.15209.12323837825873032258.stgit@devbox Signed-off-by: Ingo Molnar

ARC/kprobes: Don't call the ->break_handler() in ARC kprobes code

2018-06-21T10:33:13+00:00

Don't call the ->break_handler() from the ARC kprobes code, because it was only used by jprobes which got removed. Signed-off-by: Masami Hiramatsu Acked-by: Thomas Gleixner Cc: Ananth N Mavinakayanahalli Cc: Andrew Morton Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Vineet Gupta Cc: linux-arch@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Link: https://lore.kernel.org/lkml/152942468446.15209.13773902741600803798.stgit@devbox Signed-off-by: Ingo Molnar

ARC/kprobes: Remove jprobe implementation

2018-06-21T10:33:06+00:00

Remove arch dependent setjump/longjump functions and unused fields in kprobe_ctlblk for jprobes from arch/arc. Signed-off-by: Masami Hiramatsu Acked-by: Thomas Gleixner Cc: Ananth N Mavinakayanahalli Cc: Andrew Morton Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Vineet Gupta Cc: linux-arch@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Link: https://lore.kernel.org/lkml/152942436460.15209.3038881268172249579.stgit@devbox Signed-off-by: Ingo Molnar

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2013-11-16T00:47:22+00:00

Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...

arc: Replace __get_cpu_var uses

2013-11-06T05:10:37+00:00

__get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calcualtions are avoided and less registers are used when code is generated. At the end of the patchset all uses of __get_cpu_var have been removed so the macro is removed too. The patchset includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, u); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(this_cpu_ptr(&x), y, sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Acked-by: Vineet Gupta Signed-off-by: Christoph Lameter

doc: typo on word accounting in kprobes.c in mutliple architectures

2013-10-14T13:46:39+00:00

Signed-off-by: Anoop Thomas Mathew Signed-off-by: Jiri Kosina

ARC: Remove explicit passing around of ECR

2013-06-26T10:00:50+00:00

With ECR now part of pt_regs * No need to propagate from lowest asm handlers as arg * No need to save it in tsk->thread.cause_code * Avoid bit chopping to access the bit-fields More code consolidation, cleanup Signed-off-by: Vineet Gupta

ARC: Remove duplicate inclusion of header files

2013-04-09T06:51:15+00:00

Some header files were included twice in the same file. Signed-off-by: Sachin Kamat Signed-off-by: Vineet Gupta

ARC: [3.9] Fallout of hlist iterator update

2013-02-15T17:46:20+00:00

Commit 0bbacca "hlist: drop the node parameter from iterators" changed the iterator across the board - but ARC port being out-of-tree missed it. Signed-off-by: Vineet Gupta

ARC: kprobes support

2013-02-15T17:46:05+00:00

Origin port done by Rajeshwar Ranga Signed-off-by: Vineet Gupta Cc: Rajeshwar Ranga