<feed xmlns='http://www.w3.org/2005/Atom'>
<title>BMC/Intel-BMC/linux.git/arch/arc/Kconfig, branch dev-4.6</title>
<subtitle>Intel OpenBMC Linux kernel source tree (mirror)</subtitle>
<id>https://git.radix-linux.su/BMC/Intel-BMC/linux.git/atom?h=dev-4.6</id>
<link rel='self' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/atom?h=dev-4.6'/>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/'/>
<updated>2016-05-05T11:05:46+00:00</updated>
<entry>
<title>ARC: support HIGHMEM even without PAE40</title>
<updated>2016-05-05T11:05:46+00:00</updated>
<author>
<name>Vineet Gupta</name>
<email>vgupta@synopsys.com</email>
</author>
<published>2016-04-18T05:19:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=26f9d5fd82ca20fe536cb493ec7cf5628f8997e5'/>
<id>urn:sha1:26f9d5fd82ca20fe536cb493ec7cf5628f8997e5</id>
<content type='text'>
Initial HIGHMEM support on ARC was introduced for PAE40 where the low
memory (0x8000_0000 based) and high memory (0x1_0000_0000) were
physically contiguous. So CONFIG_FLATMEM sufficed (despite a peipheral
hole in the middle, which wasted a bit of struct page memory, but things
worked).

However w/o PAE, highmem was not possible and we could only reach
~1.75GB of DDR. Now there is a use case to access ~4GB of DDR w/o PAE40
The idea is to have low memory at canonical 0x8000_0000 and highmem
at 0 so enire 4GB address space is available for physical addressing
This needs additional platform/interconnect mapping to convert
the non contiguous physical addresses into linear bus adresses.

From Linux point of view, non contiguous divide means FLATMEM no
longer works and DISCONTIGMEM is needed to track the pfns in the 2
regions.

This scheme would also work for PAE40, only better in that we don't
waste struct page memory for the peripheral hole.

The DT description will be something like

    memory {
        ...
        reg = &lt;0x80000000 0x200000000   /* 512MB: lowmem */
               0x00000000 0x10000000&gt;;  /* 256MB: highmem */
   }

Signed-off-by: Noam Camus &lt;noamc@ezchip.com&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
</content>
</entry>
<entry>
<title>ARC: add support for reserved memory defined by device tree</title>
<updated>2016-04-27T11:36:56+00:00</updated>
<author>
<name>Alexey Brodkin</name>
<email>Alexey.Brodkin@synopsys.com</email>
</author>
<published>2016-04-26T16:29:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=1b10cb21d888c021bedbe678f7c26aee1bf04ffa'/>
<id>urn:sha1:1b10cb21d888c021bedbe678f7c26aee1bf04ffa</id>
<content type='text'>
Enable reserved memory initialization from device tree.

Signed-off-by: Alexey Brodkin &lt;abrodkin@synopsys.com&gt;
Cc: Grant Likely &lt;grant.likely@linaro.org&gt;
Cc: Marek Szyprowski &lt;m.szyprowski@samsung.com&gt;
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
</content>
</entry>
<entry>
<title>ARC: support generic per-device coherent dma mem</title>
<updated>2016-04-27T11:36:55+00:00</updated>
<author>
<name>Alexey Brodkin</name>
<email>Alexey.Brodkin@synopsys.com</email>
</author>
<published>2016-04-26T16:29:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=32ed9a0e0ddcf58ef343bcb6ae44ee60d1ee31ce'/>
<id>urn:sha1:32ed9a0e0ddcf58ef343bcb6ae44ee60d1ee31ce</id>
<content type='text'>
Signed-off-by: Alexey Brodkin &lt;abrodkin@synopsys.com&gt;
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
</content>
</entry>
<entry>
<title>ARC: Don't source drivers/pci/pcie/Kconfig ourselves</title>
<updated>2016-04-07T09:29:09+00:00</updated>
<author>
<name>Andreas Ziegler</name>
<email>andreas.ziegler@fau.de</email>
</author>
<published>2016-03-15T11:16:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=732dc97baec006c118bf49d52dd1c0b91b388497'/>
<id>urn:sha1:732dc97baec006c118bf49d52dd1c0b91b388497</id>
<content type='text'>
Commit 5f8fc43217a0 ("PCI: Include pci/pcie/Kconfig directly from
pci/Kconfig") in linux-next changed drivers/pci/Kconfig to include
drivers/pci/pcie/Kconfig itself, so that architectures do not need
to source both files themselves. ARC just recently gained PCI support
through commit 6b3fb77998dd ("ARC: Add PCI support"), but this change
was based on the old behaviour of the Kconfig files. This makes
Kconfig now spit out the following warnings:

drivers/pci/pcie/Kconfig:61:warning: choice value used outside its choice group
drivers/pci/pcie/Kconfig:67:warning: choice value used outside its choice group
drivers/pci/pcie/Kconfig:74:warning: choice value used outside its choice group

This change updates the Kconfig file for ARC, dropping the now
unnecessary 'source' statement, which makes the warning disappear.

Signed-off-by: Andreas Ziegler &lt;andreas.ziegler@fau.de&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
</content>
</entry>
<entry>
<title>Merge tag 'arc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc</title>
<updated>2016-03-21T20:00:46+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2016-03-21T20:00:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=d34687ab97731b3a707106f78756342b61f46dbc'/>
<id>urn:sha1:d34687ab97731b3a707106f78756342b61f46dbc</id>
<content type='text'>
Pull ARC architecture updates from Vineet Gupta:
 - Big Endian io accessors fix [Lada]
 - Spellos fixes [Adam]
 - Fix for DW GMAC breakage [Alexey]
 - Making DMA API 64-bit ready
 - Shutting up -Wmaybe-uninitialized noise for ARC
 - Other minor fixes here and there, comments update

* tag 'arc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (21 commits)
  ARCv2: ioremap: Support dynamic peripheral address space
  ARC: dma: reintroduce platform specific dma&lt;-&gt;phys
  ARC: dma: ioremap: use phys_addr_t consistenctly in code paths
  ARC: dma: pass_phys() not sg_virt() to cache ops
  ARC: dma: non-coherent pages need V-P mapping if in HIGHMEM
  ARC: dma: Use struct page based page allocator helpers
  ARC: build: Turn off -Wmaybe-uninitialized for ARC gcc 4.8
  ARC: [plat-axs10x] add Ethernet PHY description in .dts
  arc: use of_platform_default_populate() to populate default bus
  ARC: thp: unbork !CONFIG_TRANSPARENT_HUGEPAGE build
  arc: [plat-nsimosci*] use ezchip network driver
  ARCv2: LLSC: software backoff is NOT needed starting HS2.1c
  ARC: mm: Use virt_to_pfn() for addr &gt;&gt; PAGE_SHIFT pattern
  ARC: [plat-nsim] document ranges
  ARC: build: Better way to detect ISA compatible toolchain
  ARCv2: Allow enabling PAE40 w/o HIGHMEM
  ARC: [BE] readl()/writel() to work in Big Endian CPU configuration
  ARC: [*defconfig] No need to specify CONFIG_CROSS_COMPILE
  ARC: [BE] Select correct CROSS_COMPILE prefix
  ARC: bitops: Remove non relevant comments
  ...
</content>
</entry>
<entry>
<title>ARC: dma: reintroduce platform specific dma&lt;-&gt;phys</title>
<updated>2016-03-19T09:04:09+00:00</updated>
<author>
<name>Vineet Gupta</name>
<email>vgupta@synopsys.com</email>
</author>
<published>2016-03-16T11:08:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=f2e3d55397ff7ad62e159e14281b346760857935'/>
<id>urn:sha1:f2e3d55397ff7ad62e159e14281b346760857935</id>
<content type='text'>
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
</content>
</entry>
<entry>
<title>Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci</title>
<updated>2016-03-16T21:45:55+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2016-03-16T21:45:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=63e30271b04c712c684c07567401b61b10d094d4'/>
<id>urn:sha1:63e30271b04c712c684c07567401b61b10d094d4</id>
<content type='text'>
Pull PCI updates from Bjorn Helgaas:
 "PCI changes for v4.6:

  Enumeration:
   - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
   - Mark Broadwell-EP Home Agent &amp; PCU as having non-compliant BARs (Bjorn Helgaas

  Resource management:
   - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
   - Don't assign or reassign immutable resources (Bjorn Helgaas)
   - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
   - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
   - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
   - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
   - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
   - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
   - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
   - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)

  Virtualization:
   - Wait for up to 1000ms after FLR reset (Alex Williamson)
   - Support SR-IOV on any function type (Kelly Zytaruk)
   - Add ACS quirk for all Cavium devices (Manish Jaggi)

  AER:
   - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
   - Restore pci_ops pointer while calling original pci_ops (David Daney)
   - Fix aer_inject error codes (Jean Delvare)
   - Use dev_warn() in aer_inject (Jean Delvare)
   - Log actual error causes in aer_inject (Jean Delvare)
   - Log aer_inject error injections (Jean Delvare)

  VPD:
   - Prevent VPD access for buggy devices (Babu Moger)
   - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
   - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
   - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
   - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
   - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
   - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
   - Update VPD definitions (Hannes Reinecke)
   - Allow access to VPD attributes with size 0 (Hannes Reinecke)
   - Determine actual VPD size on first access (Hannes Reinecke)

  Generic host bridge driver:
   - Move structure definitions to separate header file (David Daney)
   - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
   - Expose pci_host_common_probe() for use by other drivers (David Daney)

  Altera host bridge driver:
   - Fix altera_pcie_link_is_up() (Ley Foon Tan)

  Cavium ThunderX host bridge driver:
   - Add PCIe host driver for ThunderX processors (David Daney)
   - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)

  Freescale i.MX6 host bridge driver:
   - Add DT bindings to configure PHY Tx driver settings (Justin Waters)
   - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
   - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
   - Remove broken Gen2 workaround (Lucas Stach)
   - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)

  Freescale Layerscape host bridge driver:
   - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)

  Intel VMD host bridge driver:
   - Attach VMD resources to parent domain's resource tree (Jon Derrick)
   - Set bus resource start to 0 (Keith Busch)

  Microsoft Hyper-V host bridge driver:
   - Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
   - Look up IRQ domain by fwnode_handle (Jake Oshins)
   - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)

  NVIDIA Tegra host bridge driver:
   - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
   - Implement -&gt;{add,remove}_bus() callbacks (Thierry Reding)
   - Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
   - Track bus -&gt; CPU mapping (Thierry Reding)
   - Remove misleading PHYS_OFFSET (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - ARC: Add PCI support (Joao Pinto)
   - Add generic dw_pcie_wait_for_link() (Joao Pinto)
   - Add default link up check if sub-driver doesn't override (Joao Pinto)
   - Add driver for prototyping kits based on ARC SDP (Joao Pinto)

  TI Keystone host bridge driver:
   - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)

  Xilinx AXI host bridge driver:
   - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
   - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
   - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
   - Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
   - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)

  Xilinx NWL host bridge driver:
   - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)

  Miscellaneous:
   - Check device_attach() return value always (Bjorn Helgaas)
   - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
   - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
   - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
   - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
   - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
   - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
   - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
   - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
   - Move pci_dma_* helpers to common code (Christoph Hellwig)
   - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
   - Add QEMU top-level IDs for (sub)vendor &amp; device (Robin H. Johnson)
   - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"

* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
  PCI: designware: Add driver for prototyping kits based on ARC SDP
  PCI: designware: Add default link up check if sub-driver doesn't override
  PCI: designware: Add generic dw_pcie_wait_for_link()
  PCI: Cleanup pci/pcie/Kconfig whitespace
  PCI: Simplify pci_create_attr() control flow
  PCI: Don't leak memory if sysfs_create_bin_file() fails
  PCI: Simplify sysfs ROM cleanup
  PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
  MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
  MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
  ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
  ia64/PCI: Use ioremap() instead of open-coded equivalent
  ia64/PCI: Use temporary struct resource * to avoid repetition
  PCI: Clean up pci_map_rom() whitespace
  PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
  PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
  PCI: thunder: Add PCIe host driver for ThunderX processors
  PCI: generic: Expose pci_host_common_probe() for use by other drivers
  PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
  ...
</content>
</entry>
<entry>
<title>ARCv2: LLSC: software backoff is NOT needed starting HS2.1c</title>
<updated>2016-03-15T10:34:44+00:00</updated>
<author>
<name>Vineet Gupta</name>
<email>vgupta@synopsys.com</email>
</author>
<published>2016-03-15T06:06:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=b31ac42697bef4a3aa5d0aa42375a55657f57174'/>
<id>urn:sha1:b31ac42697bef4a3aa5d0aa42375a55657f57174</id>
<content type='text'>
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
</content>
</entry>
<entry>
<title>ARCv2: Allow enabling PAE40 w/o HIGHMEM</title>
<updated>2016-03-12T05:18:14+00:00</updated>
<author>
<name>Vineet Gupta</name>
<email>vgupta@synopsys.com</email>
</author>
<published>2016-02-17T14:07:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=7cab91b87dd8eeee5911ec34be8bb0288ebba18b'/>
<id>urn:sha1:7cab91b87dd8eeee5911ec34be8bb0288ebba18b</id>
<content type='text'>
This allows for regression testing in PAE specific code as we lack
a 32+ bit physical memory platform other than nSIM.

Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
</content>
</entry>
<entry>
<title>ARC: Add PCI support</title>
<updated>2016-03-10T20:44:13+00:00</updated>
<author>
<name>Joao Pinto</name>
<email>Joao.Pinto@synopsys.com</email>
</author>
<published>2016-03-10T20:44:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=c1678ffcdea25afe4fbbebfab13d65a7db5458fb'/>
<id>urn:sha1:c1678ffcdea25afe4fbbebfab13d65a7db5458fb</id>
<content type='text'>
Add PCI support to ARC and update drivers/pci Makefile enabling the ARC
arch to use the generic PCI setup functions.

[bhelgaas: fold in Joao's pci-dma-compat.h &amp; pci-bridge.h build fix (I
should have caught this myself, sorry]
Signed-off-by: Joao Pinto &lt;jpinto@synopsys.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Acked-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;</content>
</entry>
</feed>
