BMC/Intel-BMC/linux.git/arch/alpha/mm/fault.c, branch dev

mm/fault, arch: Use pagefault_disable() to check for disabled pagefaults in the handler

2015-05-19T06:39:15+00:00

Introduce faulthandler_disabled() and use it to check for irq context and disabled pagefaults (via pagefault_disable()) in the pagefault handlers. Please note that we keep the in_atomic() checks in place - to detect whether in irq context (in which case preemption is always properly disabled). In contrast, preempt_disable() should never be used to disable pagefaults. With !CONFIG_PREEMPT_COUNT, preempt_disable() doesn't modify the preempt counter, and therefore the result of in_atomic() differs. We validate that condition by using might_fault() checks when calling might_sleep(). Therefore, add a comment to faulthandler_disabled(), describing why this is needed. faulthandler_disabled() and pagefault_disable() are defined in linux/uaccess.h, so let's properly add that include to all relevant files. This patch is based on a patch from Thomas Gleixner. Reviewed-and-tested-by: Thomas Gleixner Signed-off-by: David Hildenbrand Signed-off-by: Peter Zijlstra (Intel) Cc: David.Laight@ACULAB.COM Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bigeasy@linutronix.de Cc: borntraeger@de.ibm.com Cc: daniel.vetter@intel.com Cc: heiko.carstens@de.ibm.com Cc: herbert@gondor.apana.org.au Cc: hocko@suse.cz Cc: hughd@google.com Cc: mst@redhat.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: schwidefsky@de.ibm.com Cc: yang.shi@windriver.com Link: http://lkml.kernel.org/r/1431359540-32227-7-git-send-email-dahi@linux.vnet.ibm.com Signed-off-by: Ingo Molnar

vm: add VM_FAULT_SIGSEGV handling support

2015-01-29T18:51:32+00:00

The core VM already knows about VM_FAULT_SIGBUS, but cannot return a "you should SIGSEGV" error, because the SIGSEGV case was generally handled by the caller - usually the architecture fault handler. That results in lots of duplication - all the architecture fault handlers end up doing very similar "look up vma, check permissions, do retries etc" - but it generally works. However, there are cases where the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV. In particular, when accessing the stack guard page, libsigsegv expects a SIGSEGV. And it usually got one, because the stack growth is handled by that duplicated architecture fault handler. However, when the generic VM layer started propagating the error return from the stack expansion in commit fee7e49d4514 ("mm: propagate error from stack expansion even for guard page"), that now exposed the existing VM_FAULT_SIGBUS result to user space. And user space really expected SIGSEGV, not SIGBUS. To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those duplicate architecture fault handlers about it. They all already have the code to handle SIGSEGV, so it's about just tying that new return value to the existing code, but it's all a bit annoying. This is the mindless minimal patch to do this. A more extensive patch would be to try to gather up the mostly shared fault handling logic into one generic helper routine, and long-term we really should do that cleanup. Just from this patch, you can generally see that most architectures just copied (directly or indirectly) the old x86 way of doing things, but in the meantime that original x86 model has been improved to hold the VM semaphore for shorter times etc and to handle VM_FAULT_RETRY and other "newer" things, so it would be a good idea to bring all those improvements to the generic case and teach other architectures about them too. Reported-and-tested-by: Takashi Iwai Tested-by: Jan Engelhardt Acked-by: Heiko Carstens # "s390 still compiles and boots" Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds

arch: mm: pass userspace fault flag to generic fault handler

2013-09-12T22:38:01+00:00

Unlike global OOM handling, memory cgroup code will invoke the OOM killer in any OOM situation because it has no way of telling faults occuring in kernel context - which could be handled more gracefully - from user-triggered faults. Pass a flag that identifies faults originating in user space from the architecture-specific fault handlers to generic code so that memcg OOM handling can be improved. Signed-off-by: Johannes Weiner Reviewed-by: Michal Hocko Cc: David Rientjes Cc: KAMEZAWA Hiroyuki Cc: azurIt Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

alpha/mm/fault.c: Port OOM changes to do_page_fault

2012-08-19T15:41:19+00:00

Commit d065bd810b6d ("mm: retry page fault when blocking on disk transfer") and 37b23e0525d3 ("x86,mm: make pagefault killable") introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to ALPHA. Signed-off-by: Mohd. Faris Signed-off-by: Kautuk Consul Acked-by: Matt Turner Signed-off-by: Michael Cree Signed-off-by: Linus Torvalds

Disintegrate asm/system.h for Alpha

2012-03-28T17:11:12+00:00

Disintegrate asm/system.h for Alpha. Signed-off-by: David Howells cc: linux-alpha@vger.kernel.org

alpha: invoke oom-killer from page fault

2010-05-25T22:40:28+00:00

As explained in commit 1c0fe6e3bd, we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. [mattst88: kill now unused 'survive' label] Cc: linux-alpha@vger.kernel.org Cc: Richard Henderson Cc: linux-arch@vger.kernel.org Acked-by: David Rientjes Signed-off-by: Matt Turner Signed-off-by: Nick Piggin

Move FAULT_FLAG_xyz into handle_mm_fault() callers

2009-06-21T20:08:22+00:00

This allows the callers to now pass down the full set of FAULT_FLAG_xyz flags to handle_mm_fault(). All callers have been (mechanically) converted to the new calling convention, there's almost certainly room for architectures to clean up their code and then add FAULT_FLAG_RETRY when that support is added. Signed-off-by: Linus Torvalds

Use helpers to obtain task pid in printks (arch code)

2007-10-19T18:53:43+00:00

One of the easiest things to isolate is the pid printed in kernel log. There was a patch, that made this for arch-independent code, this one makes so for arch/xxx files. It took some time to cross-compile it, but hopefully these are all the printks in arch code. Signed-off-by: Alexey Dobriyan Signed-off-by: Pavel Emelyanov Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

pid namespaces: define is_global_init() and is_container_init()

2007-10-19T18:53:37+00:00

is_init() is an ambiguous name for the pid==1 check. Split it into is_global_init() and is_container_init(). A cgroup init has it's tsk->pid == 1. A global init also has it's tsk->pid == 1 and it's active pid namespace is the init_pid_ns. But rather than check the active pid namespace, compare the task structure with 'init_pid_ns.child_reaper', which is initialized during boot to the /sbin/init process and never changes. Changelog: 2.6.22-rc4-mm2-pidns1: - Use 'init_pid_ns.child_reaper' to determine if a given task is the global init (/sbin/init) process. This would improve performance and remove dependence on the task_pid(). 2.6.21-mm2-pidns2: - [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc, ppc,avr32}/traps.c for the _exception() call to is_global_init(). This way, we kill only the cgroup if the cgroup's init has a bug rather than force a kernel panic. [akpm@linux-foundation.org: fix comment] [sukadev@us.ibm.com: Use is_global_init() in arch/m32r/mm/fault.c] [bunk@stusta.de: kernel/pid.c: remove unused exports] [sukadev@us.ibm.com: Fix capability.c to work with threaded init] Signed-off-by: Serge E. Hallyn Signed-off-by: Sukadev Bhattiprolu Acked-by: Pavel Emelianov Cc: Eric W. Biederman Cc: Cedric Le Goater Cc: Dave Hansen Cc: Herbert Poetzel Cc: Kirill Korotaev Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

During VM oom condition, kill all threads in process group

2007-10-16T16:42:52+00:00

We have had complaints where a threaded application is left in a bad state after one of it's threads is killed when we hit a VM: out_of_memory condition. Killing just one of the process threads can leave the application in a bad state, whereas killing the entire process group would allow for the application to restart, or be otherwise handled, and makes it very obvious that something has gone wrong. This change allows the entire process group to be taken down, rather than just the one thread. Signed-off-by: Will Schmidt Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Russell King Cc: Ian Molton Cc: Haavard Skinnemoen Cc: Mikael Starvik Cc: David Howells Cc: Andi Kleen Cc: "Luck, Tony" Cc: Hirokazu Takata Cc: Geert Uytterhoeven Cc: Roman Zippel Cc: Ralf Baechle Cc: Kyle McMartin Cc: Matthew Wilcox Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Heiko Carstens Cc: Martin Schwidefsky Cc: Paul Mundt Cc: Kazumoto Kojima Cc: Richard Curnow Cc: William Lee Irwin III Cc: "David S. Miller" Cc: Chris Zankel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds