BMC/Intel-BMC/linux.git/Documentation/devicetree, branch dev-5.2

dt-bindings: gpio: aspeed: Update documentation with ast2600 controllers

2019-09-10T17:29:57+00:00

The ast2600 is a new generation of SoC from ASPEED. Similarly to the ast2400 and ast2500, it has a GPIO controller for it's 3.3V GPIO pins. Additionally, it has a GPIO controller for 36 1.8V GPIO pins. We use the ngpio property to differentiate between these controllers. OpenBMC-Staging-Count: 1 Signed-off-by: Rashmica Gupta Signed-off-by: Joel Stanley

Merge tag 'v5.2.11' into dev-5.2

2019-09-04T23:39:51+00:00

This is the 5.2.11 stable release Signed-off-by: Joel Stanley

dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board

2019-08-29T06:30:19+00:00

[ Upstream commit b390e0bfd2996f1215231395f4e25a4c011eeaf9 ] The YAML binding document for SiFive boards has an incorrect compatible string for the HiFive Unleashed board. Change it to match the name of the board on the SiFive web site: https://www.sifive.com/boards/hifive-unleashed which also matches the contents of the board DT data file: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts#n13 Signed-off-by: Paul Walmsley Acked-by: Rob Herring Signed-off-by: Sasha Levin

dt-bindings: watchdog: Add ast2600 compatible

2019-08-22T05:49:16+00:00

This adds a compatible for the ast2600, a new ASPEED SoC. OpenBMC-Staging-Count: 1 Reviewed-by: Andrew Jeffery Signed-off-by: Joel Stanley

dt-bindings: mmc: Document Aspeed SD controller

2019-08-22T04:55:20+00:00

The ASPEED SD/SDIO/MMC controller exposes two slots implementing the SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if only a single slot is enabled. OpenBMC-Staging-Count: 1 Signed-off-by: Andrew Jeffery Reviewed-by: Rob Herring Reviewed-by: Joel Stanley Signed-off-by: Joel Stanley

Merge tag 'v5.2.7' into dev-5.2

2019-08-09T07:15:09+00:00

This is the 5.2.7 stable release Signed-off-by: Joel Stanley

i2c: aspeed: Update to v3 of buffer and dma support

2019-08-09T07:01:00+00:00

This moves the aspeed i2c driver to the v3 RFC that Jae posted. This version has backwards compatibility with the old device tree binding, allowing us to disable the changes until the Qemu model has been updated to support buffer mode. OpenBMC-Staging-Count: 1 Reviewed-by: Jae Hyun Yoo Signed-off-by: Joel Stanley

drm/panel: Add support for Armadeus ST0700 Adapt

2019-07-31T05:24:59+00:00

commit c479450f61c7f1f248c9a54aedacd2a6ca521ff8 upstream. This patch adds support for the Armadeus ST0700 Adapt. It comes with a Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so that it can be connected on the TFT header of Armadeus Dev boards. Cc: stable@vger.kernel.org # v4.19 Reviewed-by: Rob Herring Signed-off-by: Sébastien Szymanski Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20190507152713.27494-1-sebastien.szymanski@armadeus.com Signed-off-by: Greg Kroah-Hartman

Revert "usb: usb251xb: Add US lanes inversion dts-bindings"

2019-07-31T05:24:56+00:00

commit bafe64e5f0edaa689e72e2f8dc236641da37fed4 upstream. This reverts commit 3342ce35a1, as there is no need for this separate property and it breaks compatibility with existing devicetree files (arch/arm64/boot/dts/freescale/imx8mq.dtsi). CC: stable@vger.kernel.org #5.2 Fixes: 3342ce35a183 ("usb: usb251xb: Add US lanes inversion dts-bindings") Signed-off-by: Lucas Stach Link: https://lore.kernel.org/r/20190719084407.28041-1-l.stach@pengutronix.de Signed-off-by: Greg Kroah-Hartman

dt-bindings: backlight: lm3630a: correct schema validation

2019-07-31T05:24:44+00:00

[ Upstream commit ef4db28c1f45cda6989bc8a8e45294894786d947 ] The '#address-cells' and '#size-cells' properties were not defined in the lm3630a bindings and would cause the following error when attempting to validate the examples against the schema: Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: '#address-cells', '#size-cells' do not match any of the regexes: '^led@[01]$', 'pinctrl-[0-9]+' Correct this by adding those two properties. While we're here, move the ti,linear-mapping-mode property to the led@[01] child nodes to correct the following validation error: Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: led@0: 'ti,linear-mapping-mode' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: 32fcb75c66a0 ("dt-bindings: backlight: Add lm3630a bindings") Signed-off-by: Brian Masney Reported-by: Rob Herring Acked-by: Daniel Thompson Acked-by: Dan Murphy [robh: also drop maxItems from child reg] Signed-off-by: Rob Herring Signed-off-by: Sasha Levin