BMC/Intel-BMC/linux.git/Documentation/devicetree/bindings/regulator, branch dev-5.3

Merge tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2019-07-12T01:35:30+00:00

Pull Devicetree updates from Rob Herring: - DT binding schema examples are now validated against the schemas. Various examples are fixed due to that. - Sync dtc with upstream version v1.5.0-30-g702c1b6c0e73 - Initial schemas for networking bindings. This includes ethernet, phy and mdio common bindings with several Allwinner and stmmac converted to the schema. - Conversion of more Arm top-level SoC/board bindings to DT schema - Conversion of PSCI binding to DT schema - Rework Arm CPU schema to coexist with other CPU schemas - Add a bunch of missing vendor prefixes and new ones for SoChip, Sipeed, Kontron, B&R Industrial Automation GmbH, and Espressif - Add Mediatek UART RX wakeup support to binding - Add reset to ST UART binding - Remove some Linuxisms from the endianness common-properties.txt binding - Make the flattened DT read-only after init - Ignore disabled reserved memory nodes - Clean-up some dead code in FDT functions * tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits) dt-bindings: vendor-prefixes: add Sipeed dt-bindings: vendor-prefixes: add SoChip dt-bindings: 83xx-512x-pci: Drop cell-index property dt-bindings: serial: add documentation for Rx in-band wakeup support dt-bindings: arm: Convert RDA Micro board/soc bindings to json-schema of: unittest: simplify getting the adapter of a client of/fdt: pass early_init_dt_reserve_memory_arch() with bool type nomap of/platform: Drop superfluous cast in of_device_make_bus_id() dt-bindings: usb: ehci: Fix example warnings dt-bindings: net: Use phy-mode instead of phy-connection-type dt-bindings: simple-framebuffer: Add requirement for pipelines dt-bindings: display: Fix simple-framebuffer example dt-bindings: net: mdio: Add child nodes dt-bindings: net: mdio: Add address and size cells dt-bindings: net: mdio: Add a nodename pattern dt-bindings: mtd: sunxi-nand: Drop 'maxItems' from child 'reg' property dt-bindings: arm: Limit cpus schema to only check Arm 'cpu' nodes dt-bindings: backlight: lm3630a: correct schema validation dt-bindings: net: dwmac: Deprecate the PHY reset properties dt-bindings: net: sun8i-emac: Convert the binding to a schemas ...

Merge tag 'docs-5.3' of git://git.lwn.net/linux

2019-07-09T19:34:26+00:00

Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...

dt-bindings: regulator: add support for the stm32-booster

2019-07-02T11:45:24+00:00

Document the 3.3V booster regulator embedded in stm32h7 and stm32mp1 devices, that can be used to supply ADC analog input switches. It's controlled by using system configuration registers (SYSCFG). Introduce two compatibles as the booster regulator is controlled by: - a unique register/bit in STM32H7 - a set/clear register pair in STM32MP1 Signed-off-by: Fabrice Gasnier Signed-off-by: Mark Brown

dt-bindings: qcom_spmi: Document pms405 support

2019-06-18T18:28:11+00:00

The PMS405 supports 5 SMPS and 13 LDO regulators. Signed-off-by: Jorge Ramirez-Ortiz Reviewed-by: Rob Herring Signed-off-by: Jeffrey Hugo Signed-off-by: Mark Brown

dt-bindings: qcom_spmi: Document PM8005 regulators

2019-06-18T18:27:22+00:00

Document the dt bindings for the PM8005 regulators which are usually used for VDD of standalone blocks on a SoC like the GPU. Signed-off-by: Jeffrey Hugo Reviewed-by: Bjorn Andersson Signed-off-by: Mark Brown

dt-bindings: Add missing newline at end of file

2019-06-18T14:11:57+00:00

"git diff" says: \ No newline at end of file after modifying the files. Signed-off-by: Geert Uytterhoeven Signed-off-by: Rob Herring

docs: fix broken documentation links

2019-06-08T19:42:13+00:00

Mostly due to x86 and acpi conversion, several documentation links are still pointing to the old file. Fix them. Signed-off-by: Mauro Carvalho Chehab Reviewed-by: Wolfram Sang Reviewed-by: Sven Van Asbroeck Reviewed-by: Bhupesh Sharma Acked-by: Mark Brown Signed-off-by: Jonathan Corbet

regulator: Convert max8660 binding to json-schema

2019-05-22T12:23:02+00:00

Convert the max8660 binding to DT schema format using json-schema. Signed-off-by: Rob Herring Signed-off-by: Mark Brown

regulator: Convert gpio-regulator to json-schema

2019-05-22T12:22:57+00:00

Convert the gpio-regulator binding to DT schema format using json-schema. Signed-off-by: Rob Herring Signed-off-by: Mark Brown

regulator: Convert regulator binding to json-schema

2019-05-22T12:22:51+00:00

Convert the common regulator binding to DT schema format. Note that all the properties with standard unit suffixes have type checks already, so only a description is necessary. As fixed-regulator has already been converted, update the references in it. Otherwise, keep regulator.txt with a reference to the schema to avoid a bunch of treewide updates. regulator.txt can be removed when all the regulator bindings are converted. Signed-off-by: Rob Herring Signed-off-by: Mark Brown