BMC/Intel-BMC/linux.git/Documentation/devicetree/bindings/mtd, branch dev-4.17

Merge tag 'nand/for-4.17' of git://git.infradead.org/linux-mtd into mtd/next

2018-04-04T20:11:36+00:00

Core changes: * Prepare arrival of the SPI NAND subsystem by implementing a generic (interface-agnostic) layer to ease manipulation of NAND devices * Move onenand code base to the drivers/mtd/nand/ dir * Rework timing mode selection * Provide a generic way for NAND chip drivers to flag a specific GET/SET FEATURE operation as supported/unsupported * Stop embedding ONFI/JEDEC param page in nand_chip Driver changes: * Rework/cleanup of the mxc driver * Various cleanups in the vf610 driver * Migrate the fsmc and vf610 to ->exec_op() * Get rid of the pxa driver (replaced by marvell_nand) * Support ->setup_data_interface() in the GPMI driver * Fix probe error path in several drivers * Remove support for unused hw_syndrome mode in sunxi_nand * Various minor improvements

Merge tag 'spi-nor/for-4.17' of git://git.infradead.org/linux-mtd into mtd/next

2018-04-04T20:11:24+00:00

* Make fsl-quaspi assign different names to MTD devices connected to the same QSPI controller * Remove an unneeded driver.bus assigned in the fsl-qspi driver

dt-bindings: fsl-quadspi: Add the example of two SPI NOR

2018-03-30T08:05:08+00:00

Improve the bindings example by adding an example of how to represent two SPI NOR devices. Signed-off-by: Fabio Estevam Acked-by: Han Xu Signed-off-by: Cyrille Pitchen Signed-off-by: Boris Brezillon

mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode

2018-03-29T07:38:17+00:00

This mode is not used by any existing setup and should not be used because it overwrites the BBMs. Let's just remove it before someone starts using it. Signed-off-by: Boris Brezillon Acked-by: Maxime Ripard Tested-by: Miquel Raynal

mtd: rawnand: marvell: Fix clock resource by adding a register clock

2018-03-29T07:38:10+00:00

On Armada 7K/8K we need to explicitly enable the register clock. This clock is optional because not all the SoCs using this IP need it but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updated accordingly. Signed-off-by: Gregory CLEMENT Signed-off-by: Boris Brezillon

dt-bindings: mtd-physmap: Add endianness supports

2018-03-29T07:30:08+00:00

Provide a way to specify the endianness to use when accessing a memory-mapped flash. Signed-off-by: Prabhakar Kushwaha Reviewed-by: Rob Herring Signed-off-by: Boris Brezillon

dt-bindings: mtd: remove pxa3xx NAND controller documentation

2018-03-02T20:51:41+00:00

The deprecated pxa3xx_nand.c driver does not exist anymore, it has been replaced by marvell_nand.c which has its own up-to-date documentation. Signed-off-by: Miquel Raynal Reviewed-by: Rob Herring Tested-by: Robert Jarzmik Signed-off-by: Boris Brezillon

Merge tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2018-02-01T18:57:45+00:00

Pull DeviceTree updates from Rob Herring: - Convert to use memblock_virt_alloc in DT code which supports bootmem arches. With this we can remove the arch specific early_init_dt_alloc_memory_arch() functions. - Enable running the DT unittests on UML - Use SPDX license tags on DT files - Fix early FDT kconfig ifdef logic - Clean-up unittest Makefile - Fix function comment for of_irq_parse_raw - Add missing documentation for linux,initrd-{start,end} properties - Clean-up of binding examples using uppercase hex - Add trivial devices W83773G and Infineon TLV493D-A1B6 - Add missing STM32 SoC bindings - Various small binding doc fixes * tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits) xtensa: remove arch specific early DT functions x86: remove arch specific early_init_dt_alloc_memory_arch nios2: remove arch specific early_init_dt_alloc_memory_arch mips: remove arch specific early_init_dt_alloc_memory_arch metag: remove arch specific early DT functions cris: remove arch specific early DT functions libfdt: remove unnecessary include directive from of: unittest: refactor Makefile of/fdt: use memblock_virt_alloc for early alloc of: Use SPDX license tag for DT files of/fdt: Fix #ifdef dependency of early flattree declarations dt-bindings: h8300 clocksource: correct spelling of pulse dt-bindings: imx6q-pcie: Add required property for i.MX6SX mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding dt-bindings: Use lower case hex in unit-addresses dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000 dt-bindings: Add Infineon TLV493D-A1B6 dt-bindings: mailbox: ti,message-manager: Fix interrupt name error dt-bindings: chosen: Document linux,initrd-{start,end} dt-bindings: arm: document supported STM32 SoC family ...

Merge tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd

2018-01-29T19:11:56+00:00

Pull MTD updates from Boris Brezillon: "MTD core changes: - Rework core functions to avoid duplicating generic checks in NAND/OneNAND sub-layers - Update the MAINTAINERS entry to reflect the fact that MTD maintainers now use a single git tree MTD driver changes: - CFI: use macros instead of inline functions to limit stack usage and make KASAN happy NAND core changes: - Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks - Introduce the ->exec_op() infrastructure - Rework NAND buffers handling - Fix ECC requirements for K9F4G08U0D - Fix nand_do_read_oob() to return the number of bitflips - Mark K9F1G08U0E as not supporting subpage writes NAND driver changes: - MTK: Rework the driver to support new IP versions - OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix DT support - Marvell: Add a new driver to replace the pxa3xx one SPI NOR core changes: - Add support to new ISSI and Cypress/Spansion memory parts. - Fix support of Micron memories by checking error bits in the FSR. - Fix update of block-protection bits by reading back the SR. - Restore the internal state of the SPI flash memory when removing the device. SPI NOR driver changes: - Maintenance for Freescale, Intel and Metiatek drivers. - Add support of the direct access mode for the Cadence QSPI controller" * tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd: (93 commits) mtd: nand: sunxi: Fix ECC strength choice mtd: nand: gpmi: Fix subpage reads mtd: nand: Fix build issues due to an anonymous union mtd: nand: marvell: Fix missing memory allocation modifier mtd: nand: marvell: remove redundant variable 'oob_len' mtd: nand: marvell: fix spelling mistake: "suceed"-> "succeed" mtd: onenand: omap2: Remove redundant dev_err call in omap2_onenand_probe() mtd: Remove duplicate checks on mtd_oob_ops parameter mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing mtd: mtdpart: Make ECC stat handling consistent mtd: onenand: omap2: print resource using %pR format string mtd: mtk-nor: modify functions' name more generally mtd: onenand: samsung: remove incorrect __iomem annotation MAINTAINERS: Add entry for Marvell NAND controller driver ARM: OMAP2+: Remove gpmc-onenand mtd: onenand: omap2: Configure driver from DT mtd: onenand: omap2: Decouple DMA enabling from INT pin availability mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific mtd: onenand: omap2: Convert to use dmaengine for memcpy mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation ...

Merge tag 'nand/for-4.16' of git://git.infradead.org/linux-mtd into mtd/next

2018-01-29T08:58:36+00:00

Pull NAND changes from Boris Brezillon: " Core changes: * Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks * Introduce the ->exec_op() infrastructure * Rework NAND buffers handling * Fix ECC requirements for K9F4G08U0D * Fix nand_do_read_oob() to return the number of bitflips * Mark K9F1G08U0E as not supporting subpage writes Driver changes: * MTK: Rework the driver to support new IP versions * OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix DT support * Marvell: Add a new driver to replace the pxa3xx one "