BMC/Intel-BMC/linux.git/Documentation/devicetree/bindings/leds, branch dev-5.3

Merge tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2019-07-12T01:35:30+00:00

Pull Devicetree updates from Rob Herring: - DT binding schema examples are now validated against the schemas. Various examples are fixed due to that. - Sync dtc with upstream version v1.5.0-30-g702c1b6c0e73 - Initial schemas for networking bindings. This includes ethernet, phy and mdio common bindings with several Allwinner and stmmac converted to the schema. - Conversion of more Arm top-level SoC/board bindings to DT schema - Conversion of PSCI binding to DT schema - Rework Arm CPU schema to coexist with other CPU schemas - Add a bunch of missing vendor prefixes and new ones for SoChip, Sipeed, Kontron, B&R Industrial Automation GmbH, and Espressif - Add Mediatek UART RX wakeup support to binding - Add reset to ST UART binding - Remove some Linuxisms from the endianness common-properties.txt binding - Make the flattened DT read-only after init - Ignore disabled reserved memory nodes - Clean-up some dead code in FDT functions * tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits) dt-bindings: vendor-prefixes: add Sipeed dt-bindings: vendor-prefixes: add SoChip dt-bindings: 83xx-512x-pci: Drop cell-index property dt-bindings: serial: add documentation for Rx in-band wakeup support dt-bindings: arm: Convert RDA Micro board/soc bindings to json-schema of: unittest: simplify getting the adapter of a client of/fdt: pass early_init_dt_reserve_memory_arch() with bool type nomap of/platform: Drop superfluous cast in of_device_make_bus_id() dt-bindings: usb: ehci: Fix example warnings dt-bindings: net: Use phy-mode instead of phy-connection-type dt-bindings: simple-framebuffer: Add requirement for pipelines dt-bindings: display: Fix simple-framebuffer example dt-bindings: net: mdio: Add child nodes dt-bindings: net: mdio: Add address and size cells dt-bindings: net: mdio: Add a nodename pattern dt-bindings: mtd: sunxi-nand: Drop 'maxItems' from child 'reg' property dt-bindings: arm: Limit cpus schema to only check Arm 'cpu' nodes dt-bindings: backlight: lm3630a: correct schema validation dt-bindings: net: dwmac: Deprecate the PHY reset properties dt-bindings: net: sun8i-emac: Convert the binding to a schemas ...

Merge tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

2019-07-09T15:59:39+00:00

Pull LED updates from Jacek Anaszewski: - Add a new LED common module for ti-lmu driver family - Modify MFD ti-lmu bindings - add ti,brightness-resolution - add the ramp up/down property - Add regulator support for LM36274 driver to lm363x-regulator.c - New LED class drivers with DT bindings: - leds-spi-byte - leds-lm36274 - leds-lm3697 (move the support from MFD to LED subsystem) - Simplify getting the I2C adapter of a client: - leds-tca6507 - leds-pca955x - Convert LED documentation to ReST * tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: dt: leds-lm36274.txt: fix a broken reference to ti-lmu.txt docs: leds: convert to ReST leds: leds-tca6507: simplify getting the adapter of a client leds: leds-pca955x: simplify getting the adapter of a client leds: lm36274: Introduce the TI LM36274 LED driver dt-bindings: leds: Add LED bindings for the LM36274 regulator: lm363x: Add support for LM36274 mfd: ti-lmu: Add LM36274 support to the ti-lmu dt-bindings: mfd: Add lm36274 bindings to ti-lmu leds: max77650: Remove set but not used variable 'parent' leds: avoid flush_work in atomic context leds: lm3697: Introduce the lm3697 driver mfd: ti-lmu: Remove support for LM3697 dt-bindings: ti-lmu: Modify dt bindings for the LM3697 leds: TI LMU: Add common code for TI LMU devices leds: spi-byte: add single byte SPI LED driver dt-bindings: leds: Add binding for spi-byte LED. dt-bindings: mfd: LMU: Add ti,brightness-resolution dt-bindings: mfd: LMU: Add the ramp up/down property

dt-bindings: backlight: lm3630a: correct schema validation

2019-06-28T19:27:47+00:00

The '#address-cells' and '#size-cells' properties were not defined in the lm3630a bindings and would cause the following error when attempting to validate the examples against the schema: Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: '#address-cells', '#size-cells' do not match any of the regexes: '^led@[01]$', 'pinctrl-[0-9]+' Correct this by adding those two properties. While we're here, move the ti,linear-mapping-mode property to the led@[01] child nodes to correct the following validation error: Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: led@0: 'ti,linear-mapping-mode' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: 32fcb75c66a0 ("dt-bindings: backlight: Add lm3630a bindings") Signed-off-by: Brian Masney Reported-by: Rob Herring Acked-by: Daniel Thompson Acked-by: Dan Murphy [robh: also drop maxItems from child reg] Signed-off-by: Rob Herring

dt: leds-lm36274.txt: fix a broken reference to ti-lmu.txt

2019-06-28T18:57:36+00:00

There's a typo there: ti_lmu.txt -> ti-lmu.txt Signed-off-by: Mauro Carvalho Chehab Acked-by: Pavel Machek Acked-by: Dan Murphy Signed-off-by: Jacek Anaszewski

Merge tag 'ti-lmu-led-drivers' into for-next

2019-06-11T21:46:37+00:00

Merge immutable branch between LEDs, MFD and REGULATOR due to TI LMU LED support rework and introduction of two new drivers with DT bindings. * tag 'ti-lmu-led-drivers': leds: lm36274: Introduce the TI LM36274 LED driver dt-bindings: leds: Add LED bindings for the LM36274 regulator: lm363x: Add support for LM36274 mfd: ti-lmu: Add LM36274 support to the ti-lmu dt-bindings: mfd: Add lm36274 bindings to ti-lmu leds: lm3697: Introduce the lm3697 driver mfd: ti-lmu: Remove support for LM3697 dt-bindings: ti-lmu: Modify dt bindings for the LM3697 leds: TI LMU: Add common code for TI LMU devices dt-bindings: mfd: LMU: Add ti,brightness-resolution dt-bindings: mfd: LMU: Add the ramp up/down property

dt-bindings: leds: Add LED bindings for the LM36274

2019-06-07T18:40:06+00:00

Add the LM36274 LED specific bindings. Signed-off-by: Dan Murphy Reviewed-by: Rob Herring Acked-by: Pavel Machek Signed-off-by: Jacek Anaszewski

dt-bindings: ti-lmu: Modify dt bindings for the LM3697

2019-05-24T20:40:46+00:00

The LM3697 is a single function LED driver. The single function LED driver needs to reside in the LED directory as a dedicated LED driver and not as a MFD device. The device does have common brightness and ramp features and those can be accomodated by a TI LMU framework. The LM3697 dt binding needs to be moved from the ti-lmu.txt and a dedicated LED dt binding needs to be added. The new LM3697 LED dt binding will then reside in the Documentation/devicetree/bindings/leds directory and follow the current LED and general bindings guidelines. Signed-off-by: Dan Murphy Reviewed-by: Rob Herring Acked-by: Lee Jones Signed-off-by: Jacek Anaszewski

dt-bindings: leds: Add binding for spi-byte LED.

2019-05-24T20:18:37+00:00

This patch adds the binding documentation for a simple SPI based LED controller which use only one byte for setting the brightness. Signed-off-by: Christian Mauderer Reviewed-by: Rob Herring Signed-off-by: Jacek Anaszewski

dt: fix refs that were renamed to json with the same file name

2019-05-22T14:01:01+00:00

These files were converted to json-schema, but the references weren't renamed. Fixes: 66ed144f147a ("dt-bindings: interrupt-controller: Convert ARM GIC to json-schema") (and other similar commits) Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Rob Herring

Merge tag 'backlight-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

2019-05-14T17:45:03+00:00

Pull backlight updates from Lee Jones: "Fix-ups: - Remove unused BACKLIGHT_LCD_SUPPORT symbol - Remove unused BACKLIGHT_CLASS_DEVICE dependencies - Add DT support to lm3630a_bl Bug Fixes: - Fix error path issues in lm3630a_bl" * tag 'backlight-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: lm3630a: Add firmware node support dt-bindings: backlight: Add lm3630a bindings backlight: lm3630a: Return 0 on success in update_status functions video: lcd: Remove useless BACKLIGHT_CLASS_DEVICE dependencies video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol