BMC/Intel-BMC/linux.git/Documentation/devicetree/bindings/i2c, branch dev-5.3

dt-bindings: i2c: npcm7xx: add binding for i2c controller

2019-09-16T03:30:02+00:00

OpenBMC-Staging-Count: 5 Signed-off-by: Tali Perry Reviewed-by: Rob Herring Signed-off-by: Joel Stanley

dt-bindings: i2c: sun6i-p2wi: Fix the binding example

2019-07-05T18:59:11+00:00

Even though the binding claims that the frequency can go up to 6MHz, the common i2c binding sets a limit at 3MHz, which then triggers a warning. Since the only SoC that uses that bus uses a frequency of 100kHz, and that this bus hasn't been found in an SoC for something like 5 years, let's just fix the example to have a frequency within the acceptable range for i2c. Signed-off-by: Maxime Ripard Acked-by: Gregory CLEMENT Reviewed-by: Rob Herring Signed-off-by: Wolfram Sang

dt-bindings: i2c: mv64xxx: Fix the example compatible

2019-07-05T18:59:10+00:00

One example has a compatible that isn't a valid combination according to the binding, and now that the examples are validated as well, this generates a warning. Let's fix this. Signed-off-by: Maxime Ripard Acked-by: Gregory CLEMENT Reviewed-by: Rob Herring Signed-off-by: Wolfram Sang

dt-bindings: i2c-stm32: document optional dmas

2019-06-29T11:30:49+00:00

Add missing documentation for "dmas" and "dma-names" properties that can be used on i2c-stm32. Signed-off-by: Fabrice Gasnier Reviewed-by: Pierre-Yves MORDRET Signed-off-by: Wolfram Sang

dt-bindings: i2c: omap: Add new compatible for J721E SoCs

2019-06-26T13:41:04+00:00

J721E SoCs have same I2C IP as OMAP SoCs. Add new compatible to handle J721E SoCs. Signed-off-by: Peter Ujfalusi Signed-off-by: Vignesh Raghavendra Signed-off-by: Wolfram Sang

dt-bindings: i2c: mv64xxx: Add YAML schemas

2019-06-26T13:27:40+00:00

Switch the DT binding to a YAML schema to enable the DT validation. Signed-off-by: Maxime Ripard Reviewed-by: Rob Herring Acked-by: Gregory CLEMENT Signed-off-by: Wolfram Sang

dt-bindings: i2c: sun6i-p2wi: Add YAML schemas

2019-06-26T13:27:33+00:00

Switch the DT binding to a YAML schema to enable the DT validation. Signed-off-by: Maxime Ripard Reviewed-by: Rob Herring Signed-off-by: Wolfram Sang

dt-bindings: i2c: i2c-mt7621: Add bindings for MediaTek MT7621/28/88 I2C

2019-06-26T13:18:10+00:00

Add bindings for the I2C controller that can be found in the MediaTek MT7621/7628/7688 SoCs. Signed-off-by: Stefan Roese Signed-off-by: Wolfram Sang

dt-bindings: i2c: extend existing opencore bindings

2019-06-14T21:24:33+00:00

Reformatted compatibility strings to one valid combination on each line. Add FU540-C000 specific device tree bindings to already available i2-ocores file. This device is available on HiFive Unleashed Rev A00 board. Move interrupt under optional property list as this can be optional. The FU540-C000 SoC from sifive, has an Opencore's I2C block reimplementation. The DT compatibility string for this IP is present in HDL and available at. https://github.com/sifive/sifive-blocks/blob/master/src/main/scala/devices/i2c/I2C.scala#L73 Signed-off-by: Sagar Shrikant Kadam Reviewed-by: Rob Herring Signed-off-by: Wolfram Sang

dt-bindings: i2c: riic: document r7s9210 support

2019-05-03T14:53:31+00:00

Document support for the R7S9210 (RZ/A2) SoC. Also explicitly document bindings for the R7S72100 (RZ/A1) SoC. Signed-off-by: Chris Brandt Reviewed-by: Geert Uytterhoeven Reviewed-by: Rob Herring Signed-off-by: Wolfram Sang