BMC/Intel-BMC/linux.git/Documentation/devicetree/bindings/arm/bcm, branch dev

Merge tag 'rpi-dt-for-armsoc-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi into next/dt

2015-05-15T15:23:29+00:00

Merge "RaspberryPi Device Tree changes due for v4.2" from Lee Jones: * tag 'rpi-dt-for-armsoc-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi: ARM: bcm2835: dt: Use 0x4 prefix for DMA bus addresses to SDRAM. ARM: bcm2835: dt: Add the mailbox to the device tree ARM: bcm2835: dt: Fix i2c0 node name ARM: bcm2835: dt: Use pinctrl header ARM: bcm2835: dt: Add header file for pinctrl constants ARM: bcm2835: dt: Add root properties for Raspberry Pi ARM: bcm2835: dt: Add vendor prefix for Raspberry Pi

ARM: bcm2835: dt: Add root properties for Raspberry Pi

2015-05-14T09:02:21+00:00

This patch adds root compatible properties for the following boards: - Raspberry Pi Model A - Raspberry Pi Model A+ - Raspberry Pi Model B - Raspberry Pi Model B (no P5) - Raspberry Pi Model B rev2 - Raspberry Pi Model B+ - Raspberry Pi Compute Module Reviewed-by: Stephen Warren Acked-by: Rob Herring Signed-off-by: Stefan Wahren Signed-off-by: Lee Jones

dt-bindings: Add documentation for the BCM63138 timer and syscon-reboot

2015-05-13T18:09:25+00:00

A timer node and a syscon-reboot node are required for software reboot to work on BCM63138, document these two nodes in the platform binding. Signed-off-by: Florian Fainelli

Documentation: DT: Document SMP DT nodes and properties for BCM63138

2015-05-13T17:00:04+00:00

Add binding documentation for the additional nodes and properties required to get the secondary CPU online on the BCM63138 SoC. Signed-off-by: Florian Fainelli

dt-bindings: brcm: rationalize Broadcom documentation naming

2015-03-26T17:14:11+00:00

This patchset attempts to standardize the naming of dt-bindings documents based on the Broadcom vendor prefix of brcm. Although there are no guidelines currently present for how to name the dt-bindings document the "vendor,binding.txt" style is in use by some of the other vendors. Acked-by: Lee Jones Acked-by: Florian Fainelli Acked-by: Gregory Fong Acked-by: Stephen Warren Signed-off-by: Scott Branden Signed-off-by: Rob Herring

dt-bindings: Document Broadcom Cygnus SoC and clocks

2014-10-30T18:05:55+00:00

Reviewed-by: Arun Parameswaran Tested-by: Jonathan Richardson Reviewed-by: JD (Jiandong) Zheng Reviewed-by: Ray Jui Signed-off-by: Scott Branden

ARM: BCM63XX: add basic support for the Broadcom BCM63138 DSL SoC

2014-09-17T17:56:06+00:00

This patch adds basic support for the Broadcom BCM63138 DSL SoC which is using a dual-core Cortex A9 system. Add the very minimum required code boot Linux on this SoC. Acked-by: Arnd Bergmann Signed-off-by: Florian Fainelli

devicetree: bindings: document Broadcom CPU enable method

2014-07-28T13:41:05+00:00

Broadcom mobile SoCs use a ROM-implemented holding pen for controlled boot of secondary cores. A special register is used to communicate to the ROM that a secondary core should start executing kernel code. This enable method is currently used for members of the bcm281xx and bcm21664 SoC families. The use of an enable method also allows the SMP operation vector to be assigned as a result of device tree content for these SoCs. Signed-off-by: Alex Elder Signed-off-by: Matt Porter

ARM: DT: bcm21664: Device tree bindings

2014-03-14T16:17:26+00:00

Add binding documents for the Broadcom BCM21664 SoC. Signed-off-by: Markus Mayer Signed-off-by: Matt Porter

Documentation: dt: kona-timer: Add clocks property

2013-12-23T07:45:32+00:00

The frequency for the Kona timer can either be specified through the device tree or determined by checking the rate of the clock specified in the device tree. Update the documentation to reflect both ways. Signed-off-by: Tim Kryger Reviewed-by: Matt Porter Signed-off-by: Christian Daudt